- TWO-SIDED COMPOSITE ALUMINIUM SHEET
PRODUCT PARAMETERS Unit (mm)
|
PRODUCT NAME |
MODEL |
INSTRUCTIONS |
STANDARD SIZE |
|
Two-sided Composite Aluminium Sheet |
HT05A13T04 |
Thickness:0.22mm±10%； Al-thickness:0.13mm±0.01mm； Thickness of special resin layer coating:0.05±0.01mm；Thickness of hardened resin layer coating:0.04±0.01mm. |
37"*49"； 41"*49"； 43"*49"； Can be cut according to customer requirements. |
|
HT04A10T03 |
Thickness:0.17mm±10%； Al-thickness:0.10mm±0.01mm； Thickness of special resin layer coating:0.04±0.01mm；Thickness of hardened resin layer coating:0.03±0.01mm. |
PRODUCT ADVANTAGES:
① It can effectively improve the hole position accuracy of small hole drilling, and can effectively prevent the large hole panel from being burr.
② Replace the traditional operation mode of Phenolic Entry Board+Coated Aluminium Sheet or Water Soluble Aluminum Sheet, the operation is convenient and the production efficiency is improved.
③ The surface coating has stable physical properties, is not affected by the environment, and is convenient to store and transport.
METHOD OF USE & STORAGE CONDITIONS:
①When used, the special resin layer (pig liver color) is facing up, the hardened resin layer is facing down, and it is pasted above the production board. The first contact surface of the drill needle is the special resin layer.
②The drill needs to reserve a chip removal space of 10% to 20% of the effective edge length.
③The four sides are fixed with textured adhesive paper or mechanical means, and there is no arching visually. And pay attention to whether the adhesive tape is tightly attached to the entry board.
④The entry plate shall not be creased or scratched.
⑤Placed horizontally, the storage period of the original packaging is six months.The temperature is <35℃, and the humidity is ≤70%.
