- PHENOLIC ENTRY BOARD
PRODUCT PARAMETERS Unit (mm)
|
RODUCT NAME |
MODEL |
INSTRUCTIONS |
STANDARD SIZE |
|
Phenolic Entry Board |
HL30 |
Thickness:0.30mm,1.50mm; Thickness tolerance:±0.10mm; Size tolerance:±3.0mm; Hardness:90±5Shore-D; Warpage:<0.6%of diagonal |
40"×48"; Can be cut according to customer requirements. |
|
HL50 |
PRODUCT ADVANTAGES:
① The surface hardness of the Phenolic Entry Board is high, which can effectively inhibit the burr.
②The surface is flat, smooth surface, powdery chip removal during cutting, good chip removal.
STORAGE CONDITIONS & PRECAUTIONS:
① Keep it away from the ground and protect it from moisture, high temperature, mechanical damage and direct sunlight during storage.
② The storage period of the original package is six months, the temperature is<32℃, the humidity is≤65%, and there is no corrosive gas indoors.
③ The stacking height shall not exceed 1 meter, and each pallet shall be placed separately. It shall not be stacked overlapped to avoid deformation.
④ The product is easy to cause quality changes due to environmental impact, so if it is not used up after opening, please use stretch film for complete packaging.
⑤ The product should be used up within two days after washing or slitting, otherwise it will be easily deformed.
